|
|
|
Carousel-Style Automated Filling
|
Crizaf
Carousels are cost effective, space saving and versitile.They
are available in a wide range of sizes and styles including
boxfilling, bag filling and multi level units. Crizaf
Carousels are easy to set up and easy to program - and
offer simple plug and play compatability with all Crizaf
conveyors. The Carousel can fill using a machine count,
a robot count or a Weigh-scale hopper.The Crizaf Carousel
can be combined with any Crizaf feeding conveyor to
form an economic and efficient automatic box/bag filling
system.
Carousel
Weigh-scale application pdf
Carousel
Brochure pdf
|
|
| Carousel-Style CC (boxes) |
|
The
Crizaf Box-Filling Carousel can be used to provide hours
of unattended box filling. Boxes are placed on the platform
- or box positioners can be ordered to provide precise
placement.
How
does it work?
A machine, robot or Weigh hopper
count is entered into the controller. When the pre set
count is met (a
24VDC signal or dry contact is required),
the carousel
automatically rotates to the next station. When
the last empty container is in the filling position,
a visual & acoustic alarm is engaged.
Features
-
To prevent spillage, the feeding conveyor stops during
the indexing motion of the platform. However, to allow
uninterrupted operation of the molding machine, the
counter continues to accept incoming count signals
as the Carousel turns
- Rack
and pinion drive guarantees a precise indexing motion
- 3"
dia. swivel castors with brakes allow easy mobility
and secure positioning
|
|
Carousel-Style CS (bags) |
|
Bag
holders can be ordered for the Crizaf Carousel. To allow
the maximum number of bags to fit on a platform, holders
are custom designed to specific bag sizes and come in
triangle, trapezoid, or ring shapes.
A
second level platform (CS-D) or box holder (CC-D)
doubles the capacity on the same floor space as a
single level system. Call for pricing.
This multi level bag-filling Carousel uses a pneumatically
driven chute to direct parts to the correct level
(optional).
How does it work?
-
Parts
are fed into the diverting unit which feeds them
into bags on the lower level
-
When
all of the lower level bags are filled, the diverter
flips to the second position, which diverts the
parts to the upper level bags
-
At
a pre-determined point in the cycle (ie. last bag
filling, last bag full etc.), the unit will either
signal an operator to refill or send a signal to
the molding machine to shut down
|
|
|
