 |
 |
 |
Automation
Products for the
Injection Molding Industry |
800-452-5317 |
|
|
|
|
|
|
|
|
Crizaf Rotating Drum separators
are a versatile, cost effective way to provide accurate,
post mold parts/runner separation. Perfect for even high
volume applications, Rotating Drum separators can be adjusted
to take into consideration all of the variable factors
that affect separation time, such as cycle time, rotation
speed, gap dimension and process angle. A wide choice
of speciality models allow you to quickly and accurately
separate even the most difficult part / runner combinations.
Send
us your parts and runners. We'll test them in
our separation lab and provide you with free test results
and recommendations.
Back
to Separator Home
|
ATS
|
Exceptionally
versatile. Easy to set up and adjust. |
ATS
ATS 1000
12"
longer than the ATS, the ATS 1000 is perfect for high
volume or hard to separate applications.
|
 Single
point roller adjustment allows the gaps between all
10 rollers to be spaced and set by a single control
screw.- Automatically
separates a wide range of parts / runner styles and
sizes.
- Variable
speed drive allows the speed to be adjusted to fine
tune and optimize the product flow and separation.
- A
special metering section at the beginning of the drum
ensures that all parts and runners flow through the
process without interference.
- Height
and angle adjustments are easy and can be done by
one person - without tools!
- Options:
90 degree infeed chute. Stainless steel rollers.
|
| STN
and STNP |
Exceptionally
accurate. Perfect for difficult separation problems |
|
Rollers on the STN Model separators are each independently
adjusted. The
5 individually adjusted separation points and gaps allow
STN Model Separators to achieve up to 100% part/runner
separation in even difficult to separate applications.
STN
separators Incorporate most of the features of the ATS
line. They are an excellent choice for high volume separation
of parts and runners. |
| STNP
LK |
Great
for separating round parts |
 |
 The
STNP-LK drum separator sorts dissimilar sized parts
a different way. The drum has holes throughout its
length that are sized to allow smaller parts through
the holes - everything else passes down to the end
of the process. Perforated holes can be sized to meet
specific application needs.
Line
Drawings
|
STNP
LK -
tubes |
Great
for hard to separate sprues |
 |
This
specialized perforated drum was developed to separate
runners that slip through the perforations by pivoting.
The addition of extensions on each hole, prevents the
runners from pivoting. Runners pass over the holes and
exit at the end of the drum. Parts are still able to fall
through the holes.
Return to new
products |
|
| |
|
|
|
 |
| © 2004
Crizaf Automation Systems. All rights reserved. |
|
|
|
