| |
|
|
|
 LIH
Series - Heavy Duty Incline Conveyors
Return to LIH Series Conveyors
Frame
- 6"H x 1¾"W
heavy-duty anodized extruded aluminum profile with 1-3/8" sq.,
18" centered aluminum dual frame
cross supports.
- Open channel frame
design with easy T-nut mounting along entire frame.
- Heavy-duty 4"H
90° extruded aluminum side rails with reinforcement;
3/8" belt overlap per side.
- Galvanized steel
belt pan.
Drive
- Power transmission
via chain of a 110 VAC 60 Hz single phase TEFC motor and reducer
with fixed belt speed 20 fpm.
- Thermal overload
protected motor starter (on/off) with grounded 15ft. SJ cord and
standard plug.
- Protected motor
location underneath conveyor at infeed end.
- 4" dia. extruded
aluminum drive & idle pulleys.
- Pulleys are totally
enclosed with safety guards, removable for maintenance and equipped
with
lifetime lubricated maintenance
free sealed ball
bearings.
Belt
- Non-slip surface,
endless PVC belt (green); temperature resistant up to 160°F,
permanent anti-static.
- V-guide self aligning
belt tracking system.
- Belt running direction
away from the motor. It can be rewired to be reversed.
Legs
- Heavy-duty perforated
zinc plated steel legs with double T-base & with
leveling pads. Plate with mounted nylon swivel castors, (2) locking & (2)
non-locking are included.
- Sliding sleeve
height adjustment with screw knob fastener & positioning
pin (no tools required).
- Easy 0-45° angle
adjustment using ratcheting handles to lock the conveyor in the desired
position without the use
of tools.
- Leg height determined
by application.
Return
to LIH Series Conveyors
|
