LR Series - Horizontal to Decline Conveyors Return to LR Series conveyors

Frame

• 3"H x 1¼"W anodized extruded aluminum profile with 1-3/8" sq., 18" centered aluminum frame cross supports.
• Open channel frame design with easy T-nut mounting along entire frame.
• 2 ½"H 90°extruded aluminum side rails with 3/8" belt overlap per side.
• Recessed side rails on top shelf to avoid pinch points for parts.
• Galvanized steel belt pan..

Drive

• Power transmission via chain of a 110 VAC 60 Hz single phase TEFC motor and reducer with fixed belt speed 20 fpm.
• Thermal overload protected motor starter (on/off) with grounded 15ft. SJ cord and standard plug.
• Protected motor location underneath conveyor at discharge end.
• Extruded aluminum drive & idle pulleys.
• Pulleys are totally enclosed with safety guards, removable for maintenance and equipped with lifetime lubricated maintenance free double sealed ball bearings.

Belt

• Non-slip surface, endless PVC belt (green); temperature resistant up to 160°F, permanent anti-static.
• V-guide self aligning belt tracking system.
• 2-3/8" dia. aluminum support roller underneath belt in transition area with guard.
• Belt running direction towards motor. It can be rewired to be reversed.

Legs

• Perforated zinc plated steel legs with welded rectangular steel base & 2-3/8" dia. swivel castors, (2) locking & (2) non-locking.
• Sliding sleeve height adjustment with screw knob fastener & positioning pin (no tools required).
• Easy 0-45° angle adjustment of decline & top shelf using ratcheting handles to lock the conveyor in the desired position without the use of tools.
• Leg height determined by application.
  
  Return to LR Series conveyors