| |
|
|
|
 L
Series - Horizontal Conveyors Return
to L Series conveyors
Frame
- 3" H x 1
-1/4"
W anodized extruded aluminum profile with 1-3/8" sq., 18" centered
aluminum frame cross supports.
- Open channel frame
design with easy T-nut mounting along entire frame.
- 2-1/2" H 90°
extruded aluminum side rails with 3/8" belt overlap per side.
- Galvanized steel
belt pan.
Drive
- Power transmission
via chain of a 110 VAC 60 Hz single phase TEFC motor
and reducer with fixed belt speed of 20 fpm.
- Thermal overload
protected motor starter (on/off) with grounded 15ft. SJ
cord and standard plug.
- Protected
motor location underneath conveyor at infeed end. Extruded
aluminum drive & idle pulleys.
- Pulleys are
totally enclosed with safety guards, removable for maintenance
and equipped with lifetime lubricated maintenance free double
sealed ball bearings (on conveyors smaller than 24" wide).
Belt
- Smooth surface,
endless polyurethane belt (green); temperature resistant up to 212°F,
permanent anti-static.
- V-guide self
aligning belt tracking system.
- Belt running
direction away from motor. It can be rewired to be reversed.
Legs
- Perforated zinc
plated steel legs with leveling pads. Castors are available.
- Sliding sleeve
height adjustment with screw knob fastener & positioning pin (no
tools required).
- Leg height determined
by application.
Return
to L Series conveyors
|
