| |
|
|
|
PB Series - Plastic
Belt Conveyors Return
to PB Series conveyors
Frame
- Frame of conveyor
is made from a heavy duty 4 ½” high clear anodized extruded
aluminum profile, providing a sturdy yet lightweight construction.
- Side rail profile
is 3" tall and also from extruded aluminum.
- 2 sided straight
infeed part retainer included – 3 sided tapered hopper also available.
Drive
- The conveyor is
driven by a direct drive mounted to either side of the discharge end.
- A friction clutch
gear box provides extra safety by allowing the conveyor belt to be easily
stopped by hand or should an obstacle prevent the belt from moving.
The clutch is adjustable.
- Standard belt
speed is 18 FPM – variable speed and indexing control are also
available.
Belt
- Sprocket driven
modular plastic belt is temperature resistant to 194°F (90°C)
- The belt is equipped
with 1.5" high side walls that are an integral part of the belt
and move along with the belt.
- Not only does
this contain the parts on the belt, it also protects delicate parts
from being damaged by scraping against the sides of the conveyor.
- Cleats are made
from soft polyurethane – helps to prevent part damage to warm
parts that fall on the cleats. (All models except the PBL Series).
Legs
- Perforated zinc
plated steel legs with swivel castors.
- Sliding sleeve
height adjustment with screw knob and positioning pin (no tools required).
- Leg height adjustment
range determined by application.
Return
to PB Series conveyors
|
